Adjust Bluetooth Settings - Jensen VX3020 Operating Instructions Manual

VX3020
Receiving a Call
By default, all incoming calls are received automaticaly.
1. If there is an incoming call, the screen will display "Incoming call...".
2. Touch the screen to select [ hang up ] or [ Answer ].
Speak into the Bluetooth microphone.
Tip
• You can select to receive calls manually by setting [Auto answer] to [OFF]

Adjust Bluetooth Settings

1. In Bluetooth menu, touch [ Options ].
The option menu is displayed.
2. Touch on the selected option to change the setting.
∙ [Bluetooth]:
∙ [Auto connect]: To turn the "Auto Connect" function ON or OFF .
∙ [Auto answer]: To turn the "Auto Answer" function ON or OFF .
∙ [Pairing code]: To set the paring code.
∙ [Phone sync]: To synchronize phone book, touch [ OK ] on the sub-menu
NOTE:
• You can also adjust Bluetooth settings in the "Settings" menu.
128-9278 VX3020 Operating Instructions 02 20 2014.indd 37
Figure 27. Bluetooth® Incoming Call Screen
To turn the "Bluetooth" function ON or OFF.
P h o n e b o o k S y n c h m a y t a k e s e v e r a l m i n u t e s t o
load on initial setup.
Figure 28. Bluetooth® Settings Menu
37
2/20/2014 6:19:53 PM