Operation; Micro Sd Card - Uniden iGO CAM 750 Owner's Manual

Operation

Micro SD Card

A compatible micro SD card has to be inserted before you start
using the unit. Ensure that the unit is turned off before inserting
or removing the SD card.
NOTE
The unit can support micro SDHC cards (High Capacity SD) up to 32GB in
capacity. A micro SDHC card of at least 8GB capacity and minimum speed of
Class 10 is recommended.
Insert a formatted micro SD card gently in the slot at the bottom of the unit. To
remove the card from the slot, press the edge of the SD card inwards for it to
pop out and then pull it out of the slot.
It is important to format the micro SD card before using it, so as to avoid any
damage to the files created on iGO CAM 750.
Uniden recommends using good quality micro SD cards.
Battery Information
The unit has an in-built battery of 180mAh capacity.
The iGOCAM 750 is designed mainly for in-vehicle use, drawing on vehicle
power and the duration of portable use is limited by the settings and the
battery operating time.
The unit will charge the battery whenever power is detected through the USB/
DC IN port on the unit or on the bracket.
The unit will take about 2 hours to charge completely.
Please ensure that the battery is fully charged before using it
for the first time. To extend the battery life, charge the unit fully
once every 3 months.
NOTE
UNIDEN iGO CAM 750
8
Vehicle Recorder