How Do I Put It In My Car; Attaching The Windshield Mount - Uniden iGO CAM 750 Owner's Manual

How Do I Put It in My Car?

Attaching the Windshield Mount

1. Slide the bracket hook into the bracket slot provided on the top of the unit.
BRACKET SLOT
2. After inserting the hook, push it down till it locks in position.
3. Press the suction cup flat against the windshield.
4. Rotate the suction lock clockwise to secure the unit in place and tighten the
locking collar.
5. Gently pull on the mount to make sure it is secure.
6. To remove the unit, press the lever at the back of the windshield mount and
gently pull the unit out.
It maybe a good idea to secure the power cord with cable clips so that it does
not interfere while driving.
The unit can be rotated to 180° to the left and right. However, avoid rotating
the unit at 360° as it might damage the cabling inside.
Suction cups will not stick well on a curved/textured or wet surfaces.
NOTE
UNIDEN iGO CAM 750
BRACKET HOOK
LEVER
LOCKING COLLAR
SUCTION LOCK
SLIDE LOCK
7
DC IN Port
Vehicle Recorder