Care And Maintenance; Battery Replacement - Garrett AT Gold Owner's Manual

CARE AND MAINTENANCE

Battery Replacement—The AT Gold is operating with
fresh or fully charged batteries when 4 illuminated bars on
the are displayed (see above). The
detector will maintain full performance until the batteries
need to be replaced. Replace batteries when there is only
Remove the battery
cover by rotating
the cover one-
quarter turn in a
counterclockwise
direction. Grasp
the cap by top and
bottom and pull it
straight back. Slide
the battery tray
out to replace the
batteries.
56 Garrett Metal Detectors
Battery Level
Indicator
INSERT BATTERY HOLDER
IN THIS POLARITY
one segment remaining. NiMH rechargeable batteries may
be used. Expect 20 to 40 hours of operation depending on
battery type and quality.
Access and replace the batteries by rotating the battery
cover housing one-quarter turn counterclockwise. Pull and
remove the cap to slide the battery holder out. Remove
batteries when the AT Gold will be stored for longer than 30
days.
The AT Gold is a rugged machine, designed for outdoor
use in all environments. However, as with all electronic
equipment, there are some simple ways to care for the
detector to maintain its high performance.
as storing the detector in an automobile trunk during the
summer or outdoors in sub-freezing weather.
damp cloth when necessary.
with a damp cloth.
batteries from the detector.
batteries, be sure to replace with all new batteries for
optimum performance.
headphones.
57
AT Gold ™