Front Light Group - PIAGGIO X8 400 i.e. Owner's Manual

Front light group (03_22, 03_23, 03_24)

To remove the rear light assembly, proceed as follows:
1. Remove the mirror cover, fastened by the two top screws and retained by the lower
rubber ring joining it to the lower fairing;
2. Remove both driving mirrors by loosening the fixing screws "A" on the right and left
hand-side;
3. Loosen the four fixing screws "B" and then remove the headlight cover;
4. Extract the headlight from it housing by loosening the three fixing screws "D";
03_22
To reassemble, repeat the operation in the reverse order.
WARNING
HIGH AND LOW BEAM LIGHT ARE OF THE HALOGEN TYPE: DO NOT TOUCH
WITH YOUR FINGERS TO AVOID DAMAGING THEIR FUNCTION.
03_23
03_24
66