Correcting A Burner Fault - Buderus Logano plus SB325 Installation And Service Instructions Manual

Floorstanding condensing boiler
Hide thumbs Also See for Logano plus SB325:
Table of Contents

Advertisement

9

Correcting a burner fault

NOTICE: System damage due to frost.
When there are freezing conditions, the heating system
can freeze if it is not operational, e.g. because of a fault
shutdown.
▶ When there is a risk of frost, protect your heating
system against freezing.
▶ If your heating system has been shut down for several
days due to a fault shutdown and there is a risk of
frost, drain the heating water at the drain & fill valve.
Also leave the air vent valve at the highest point in the
system open.
NOTICE: System damage from pressing the reset button
too frequently.
This can damage the burner ignition transformer.
▶ Press the reset button no more than three times in a
row.
The display shows heating system faults. Further information on the
fault displays can be found in the service instructions of the relevant
control unit. In addition, burner faults are signalled by an indicator on the
burner.
▶ Press burner reset button (see burner operating instructions).
If the burner still fails to start after three attempts, contact a contractor.
Logano plus SB325 – 6 720 806 328 (2013/07)
10
Environmental protection/disposal
Environmental protection is a key commitment of the Bosch Group.
Quality of products, efficiency and environmental protection are equally
important objectives for us. All legislation pertaining to the environment
is strictly observed. To protect the environment we use the best possible
technology and materials, subject to economic considerations.
Packaging
Where packaging is concerned, we participate in country-specific
recycling processes that ensure optimum recycling. All of our packaging
materials are environmentally compatible and can be recycled.
Obsolete equipment
Old appliances contain materials that should be recycled.
The relevant assemblies are easy to separate, and all plastics are
identified. In this manner the individual components are easily sorted
and added into the recycling and disposal systems.
Correcting a burner fault
9
37

Advertisement

Table of Contents
loading

Table of Contents