Replacing The Top Cover - Honeywell W8735D Installation Instructions Manual

24 VAC/VDC
SENSOR
Fig. 15. Wiring the AUX-IN Terminal Block to a
24 Vac/dc Sensor.
HOME SECURITY
PANEL
AUXILIARY
(OPTIONAL 24 VAC
TRANSFORMER)
L1 L2
Fig. 16. Wiring the AUX-OUT Terminal Block to a Home
Security Panel.
NOTE: For the wiring in Fig. 16, be sure to check the exact
connections with the Home Security Panel Installa-
tion Instructions-Auxiliary Devices.
1/D
2/R CHANNEL 1
3/B
1/D
2/R CHANNEL 2
3/B
OUTPUT
AUXILIARY
INPUT
M23756
1/D
2/R CHANNEL 1
3/B
1/D
CHANNEL 2
2/R
3/B
OUTPUT
AUXILIARY
INPUT
M23757
W8735D TELEPHONE ACCESS MODULE
L1
L2
BUZZER
N.O. 24 VAC
Fig. 17. Wiring the AUX-OUT Terminal Block to Line
Voltage Annunciating Device (Buzzer).

Replacing the Top Cover

Reinstall the cover on the W8735D as described below:
1. Align the four latches on the cover with the receptacles
on the base.
NOTE: Cover goes on only one way. The cut-out in the cover
must align with the battery cover latch on the base.
2. Gently press the cover plate into position until all four
latches engage. See Fig. 18.
Fig. 18. Replacing the Top Cover.
11
1/D
2/R
3/B
1/D
24 VAC
TRANSFORMER 2/R
3/B
OUTPUT
RELAY
INPUT
LATCH (x4)
CUT-OUT FOR
COVER LATCH
BATTERY COVER
CHANNEL 1
CHANNEL 2
AUXILIARY
M23758
BATTERY
M23759
69-2027—01