Vehicle Speakers - Cadillac 2015 CUE Infotainment System User Manual

2015 cadillac cue infotainment system user manual
Hide thumbs Also See for 2015 CUE Infotainment System:
Table of Contents

Advertisement

50
Infotainment System
button to reset the settings. The
parental settings will not be
affected.

Vehicle Speakers

Audio from the DVD player or an
auxiliary device can be heard
through the vehicle speakers or the
wireless/wired headphones, while
the radio is tuned to one of the
many frequencies selected on the
Sound Around portion of the
system's remote control. See
Remote Control later in this
section.
Only one audio source can be heard
through the vehicle's speakers at a
time. The audio source being used
is specified by the A/V (audio/video)
source selected on the driver side
head restraint video display screen.
To turn the RSE system audio
output to the vehicle's speakers,
press Sound Around ON, on the
system's remote control. The audio
from the RSE system can be heard
through the wireless/wired
headphones and the vehicle's
speakers at the same time. The
volume on the radio can vary when
switching between the radio, CD,
DVD, MP3, or an auxiliary device.
Wired Headphones
0
VOL
(Volume): Use to adjust
the volume on the headphones.
100 Channel FM-Modulation
Control
For Monitor A Only:
To activate the FM modulation
feature, press the Sound Around
On/Off button until the text FM CH
XX.XMH2 is displayed on the
monitor.
On the remote, press the Sound
Around Select button to cycle
through a pre-established list of 6
channels (88.3MHz, 88.7MHz,
89.1MHz, 89.5MHz, 89.9MHz,
90.3MHz.)
If none of these stations are suitable
for FM modulation, use the Fine
Tune option. To Fine Tune the
modulator to a specific target station
while the display is active, press the
Up or Down keys on the remote
to change the channel by 0.2MHz.
Hold down the Up" or Down keys
to cycle quickly through the stations.
When the end (107.9MHz) or
beginning (87.5MHz) of the FM
band is reached, the channels will
continue from the beginning
(87.5MHz) or end (107.9MHz),
respectively.
To deactivate the FM modulation
feature, press the Sound Around
On/Off button on the remote until
the text FM OFF is displayed on
the monitor.
Caution
Do not store the headphones in
heat or direct sunlight. This could
damage the headphones and
repairs will not be covered by the
warranty. Storage in extreme cold
can weaken the batteries. Keep
the headphones stored in a cool,
dry place.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents