Using The Operation Panel (Advanced Operations); Setting Memory Switches - Brother KE-430FX Instruction Manual

6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)

6-1. Setting memory switches

Change the mode to memory switch setting mode.
1
Menu indicator switches off, TEST indicator flashes
Select the memory switch that you would like to change
2
the setting for.
If you would like to display only the numbers of
memory switches that have been changed from default
settings
Change the memory switch parameters.
3
Apply the changed parameter setting.
4
Repeat steps 2 to 4 above to set each memory switch.
5
Exit setting mode.
6
All indicators switch off
TEST indicator switches off
KE-430FX/KE-430FS, BE-438FX
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
While pressing the TEST key, press the TENSION key.
・ The memory switch number will be displayed in the
PROGRAM No. display and the setting value for that
number will be displayed in the menu display.
Press the or
number.
While pressing the SELECT key, press the
(1).
・ The numbers of memory switches that have been
changed from default settings will appear in order.
Press the or
・ The flashing display means that the setting has not yet been
applied.
・ You can make the initial setting appear in the display by
pressing the RESET key.
Press the ENTER key.
・ The menu display will change from flashing to
illuminated, and this means that the parameter setting
has been applied.
・ If you press the
without pressing the ENTER key, you can cancel the
2414B
parameter changes.
Press the TEST key.
・ The changes will be memorized and the sewing
machine will switch to home position detection standby.
key to select the memory switch
key to change the setting value.
or key (1) or the TEST key
2420B 2421BB
2422B
or key
2423B
2424B
2404B
44