Using The Hardware Keyboard - HTC Power Vision User Manual

2.1 Using the Hardware Keyboard

Your device provides you with a QWERTY keyboard, which is similar to a standard computer keyboard.
When you slide open the hardware keyboard, the screen automatically changes to landscape view. The screen
changes back to portrait view when you close the hardware keyboard.
You can do the following with the QWERTY keyboard:
To type lowercase letters, press the keys using your thumbs or fingers.
To turn on Caps Lock mode so that you can type all uppercase letters, press the Function Key (
then press
Caps Lock mode, press these buttons again.
To type a single uppercase letter, press
To enter a number or symbol (labeled in color on the keys), press
To open the Symbol Pad, press
Press the left or right softkeys (
Press to verify your data entries or exit the program in use.
Press to open the Start menu.
Press the arrow keys
To type accented characters (like á, ã, ç, ê, í, ó, ü, etc), press the letter key first, and then hold
time pressing the space bar
24 Section 2: Entering and Searching Information
Slide the screen panel
to the left to reveal
the keyboard.
Shift Key /
Left softkey
Caps Lock
LED
Function Key
. The Shift Key/Caps Lock LED lights up to indicate that Caps Lock mode is enabled. To turn off
and then press
/
for directional movement.
several times until you find the character you need.
Function
Key LED
and then press the desired letter.
and then press the corresponding key.
.
) to perform the command shown in the label above the keys.
Right softkey
) first, and
at the same