Changing The Engine Oil - Dixon 1999 ZTR 4515B Operator's Manual

CAUTION

CHANGING THE ENGINE OIL:

1. The "snap lock" oil drain valve is located on the left side of the engine crankcase.
2. Place a suitable container under the drain valve. The fitting of a short piece of
hose to the valve will help direct the oil.
3. Push the valve body in and twist to clear the detent notch.
4. Pulling the valve body outward will start the flow of oil.
NOTE: Refer to engine manufacturers recommendations for frequency of oil changes.
Briggs & Stratton
PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS.
CARE AND MAINTENANCE
HOT oil may cause burns.
Allow engine to cool before draining oil.
-PROTECT YOUR ENVIRONMENT-
Kohler
Page 31