Combination Switch - Mercedes-Benz CLK Coupe Operator's Manual

Combination switch

2
5
Low beam (exterior lamp switch position B)
1
High beam (exterior lamp switch position B)
2
Combination switch
Instruments
Operation
and controls
4
4
1
3
5
P54.25-2034-26
Instrument
Driving
cluster display
3 High beam flasher (high beam available
independent of exterior lamp switch position)
4
Turn signals, right
5 Turn signals, left
To signal minor directional changes, such as changing
lanes on a highway, move combination switch to the
point of resistance only and hold it there.
To operate the turn signals continuously, move the
combination switch past the point of resistance (up or
down). The switch is automatically canceled when the
steering wheel is turned to a large enough degree.
Turn signal failure
If one of the turn signals fails, the turn signal indicator
system flashes and sounds at a faster than normal rate.
117
Practical hints Car care
Technical
Index
data