Purchase Status - Motorola DCX3200 P2 Installation Manual

4 DIAGNOSTICS

Purchase Status

This diagnostic displays the status of subscriber event purchases on the OSD. The
information is updated each time this diagnostic is viewed:
The Purchase Status fields are:
Field
Unsent
Unack
Last Seq Num
Last RB Time
IPPV Status
Prep CMD
Prep ACK
Poll Request
Poll
Acknowledge
Stack Unit
Show Count
Description
The number of purchases in the DCX remaining to be polled. It can be an
integer from 0 to 63.
The number of reports that have not been acknowledged by the controller.
It is an integer.
The last acknowledged sequence number of a purchase sent by the
controller. It is a 16-bit, unsigned hexadecimal number.
The last time the DCX3200 attempted to report back purchases to the
controller, in GPS seconds.
If IPPV is enabled, the IPPV status indicator is on. If IPPV is disabled, the
IPPV status indicator is off.
"Last Prepare for Poll Command" sequence number and time of the last
prepare for poll request command that was sent by the controller. Note
that each requesting process maintains an independent sequence of poll
requests to uniquely identify the poll responses.
"Last Prepare for Poll Acknowledge" sequence number and time of the
last Report Purchase request sent by the controller.
Sequence number and time of the last send poll buffer command that was
sent by the controller.
Sequence number and time of the last Poll Acknowledge message sent
by the controller.
Unit used in purchase processing.
Count used in purchase processing.
36