Motorola DCX3200 P2 Installation Manual page 34

3 INSTALLATION
Setting
My TV Supports
The Following
Formats
Description
The 4:3 Override feature is available when the HDMI/YPbPr Output setting
is 1080i, 720p, or 480p.
The My TV Supports The Following Formats checklist allows you to
configure the Native mode operation of the DCX3200. The checklist
becomes accessible only when the HDMI/YPbPr Output setting is set to
Native. The DCX3200 is capable of delivering all of the video formats listed
in this checklist depending upon the type of video connection (HDMI™ or
YPbPr) being used. By default, the 1080i and 480i formats are checked in
this checklist.
The options are used as follows:
•
1080p30 — The DCX3200 presents programs broadcast in the High
Definition 1080p30 format (1920 x 1080 pixels with progressive
scanning at 30 frames per second) using the HDMI™ connection only.
The DCX3200 cannot convert any other broadcast format to the
1080p30 format.
•
1080p24 — The DCX3200 presents programs broadcast in the High
Definition 1080p24 format (1920 x 1080 pixels with progressive
scanning at 24 frames per second) using the HDMI™ connection only.
The DCX3200 cannot convert any other broadcast format to the
1080p24 format.
•
1080i — The DCX3200 presents programs broadcast in the High
Definition 1080i format using both the HDMI™ and YPbPr
connections. The DCX3200 also converts any other broadcast format
to the 1080i format.
•
720p — The DCX3200 presents programs broadcast in the High
Definition 720p format using both the HDMI™ and YPbPr connections.
The DCX3200 also converts any other broadcast format to the 720p
format.
•
480p — The DCX3200 presents programs broadcast in the Enhanced
Definition 480p format using both the HDMI™ and YPbPr connections.
The DCX3200 also converts any other broadcast format to the 480p
format.
•
480i — The DCX3200 presents programs broadcast in the Standard
Definition 480i format using both the HDMI™ and YPbPr connections.
The DCX3200 also converts any other broadcast format to the 480i
format.
Note 1: The DCX3200 cannot provide 1080p30 or 1080p24 video using the
YPbPr output. When using the DCX3200 in Native mode, these two formats
are disabled and inaccessible if there is no HDMI™ connection in place.
Note 2: When connecting the DCX3200 to an HDMI™ (or DVI) TV, the TV
provides the DCX3200 with its list of supported video formats. The
DCX3200 automatically places a check next to the formats in the checklist
that it can verify are supported by the TV. The checklist may be modified
manually after the DCX3200 performs the automatic configuration.
Note 3: While this checklist provides the ability to customize the Native
mode experience when using the DCX3200, it can also result in a loss of
video if the checklist is modified without a clear understanding of the video
formats supported by the TV. These settings should only be modified by a
professional installer or someone with a good working knowledge of the
video formats supported by the TV.
Note 4: When using the DCX3200 in Native mode, at least one of the
following formats (1080i, 720p, 480p, 480i) MUST be checked even if one
or both of the 1080p formats has been checked. The DCX3200 cannot be
26