Rear Panel; Selecting An Installation Location - Arris Touchstone TG2472 User Manual

Rear Panel

The rear of the Telephony Gateway has the following connectors and controls.
1. Reset button: resets the Telephony Gateway as if you power cycled the unit. Use a
pointed non-metallic object to press this button.
2. USB: USB host connector - future support for external USB devices
3. Tel 1: connector for the first phone line.
4. Tel 2: connector for the second phone line.
5. Ethernet (1 - 4): connectors for use with a computer LAN port.
6. Cable: connector for the coaxial cable.
7. Power: connector for the power cord.

Selecting an Installation Location

There are a number of factors to consider when choosing a location to install your
Telephony Gateway:
Is an AC outlet available nearby? For best results, the outlet should not be switched and

should be close enough to the Telephony Gateway that extension cords are not
required.
Release 24 STANDARD 1.1 January 2015
Chapter 5: Installing and Connecting your Telephony Gateway
Touchstone TG2472 Telephony Gateway User Guide 23