Furuno SC-30 Operator's Manual page 14

1. MOUNTING
Installation examples for a pleasure boat
No tuna tower
Sensor fixed to
a platform
Radome
radar antenna
With tuna tower
Busse-Yachtshop.de
Fixing hole
Fix directly to vessel, above
other equipment as much
as possible.
6
info@busse-yachtshop.de
Fixing holes should "surround"
the sensor. Further, fix the
mounting pole at a right angle.
The recommended
dimensions for the pole are
Diameter: more than
Length: less than 500 mm
Fixing hole
Do not mount the sensor
like this.
Vibration can damage the
sensor.
Fix sensor to pipe at stern side of
sensor if guardrail or the like runs
to top of tuna tower, etc.
No pipe
φ
80 mm
Pipe with
large diameter