Chrysler 200 Convertible 2014 Owner's Manual page 142

140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Conference Call
When two calls are in progress (one active and one on
hold), press and hold the
double beep indicating that the two calls have been
joined into one conference call.
Three-Way Calling
To initiate three-way calling, press the
a call is in progress, and make a second phone call, as
described under "Making a Second Call While Current
Call is in Progress." After the second call has established,
press and hold the
beep, indicating that the two calls have been joined into
one conference call.
Call Termination
To end a call in progress, momentarily press the
ton. Only the active call(s) will be terminated and if there
is a call on hold, it will become the new active call. If the
button until you hear a
button while
button until you hear a double
active call is terminated by the phone far end, a call on
hold may not become active automatically. This is cell
phone-dependent. To bring the call back from hold, press
and hold the button until you hear a single beep.
Redial
• Press the
button to begin.
• After the "Ready" prompt and the following beep, say
"Redial."
• The Uconnect® Phone will call the last number that
was dialed from your mobile phone.
NOTE: This may not be the last number dialed from the
Uconnect® Phone.
Call Continuation
but-
Call continuation is the progression of a phone call on the
Uconnect® Phone after the vehicle ignition has been