Download Print this page
Chrysler 200 Convertible 2011 Specifications

Chrysler 200 Convertible 2011 Specifications

Hide thumbs Also See for 200 Convertible 2011:

Advertisement

Quick Links

NOTE: Information shown is correct at time of publication and is subject to change.
2011 Chrysler 200 Convertible

SPECIFICATIONS

The information shown is preliminary and based on data available at the time of publication. All dimensions are in inches
(millimeters) unless otherwise noted. All dimensions are measured at curb weight with standard wheels and tires unless
otherwise noted.
GENERAL INFORMATION
Body Style
Assembly Plant
EPA Vehicle Class
Introduction Date
ENGINE: 2.4-LITER, GASOLINE, DOHC, 16-VALVE, VVT, SMPI I-4
Availability
Type and Description
Displacement
Bore x Stroke
Valve System
Fuel Injection
Construction
Compression
Power (SAE net, estimated)
Torque (SAE net, estimated)
Max. Engine Speed
Fuel Requirement
Oil Capacity
Coolant Capacity
Emission Controls
Estimated EPA Fuel Economy mpg
(City/Hwy)
(a) Meets Federal Tier 2, Bin 5 emissions requirements and PZEV requirements in California, Massachusetts, New York, Maine,
Vermont, Connecticut, Pennsylvania, Rhode Island, New Jersey, Oregon and Washington. Meets Euro IV emissions
requirements.
ENGINE: 3.6-LITER, GASOLINE, DOHC, 24-VALVE, SMPI V-6
Availability
Type and Description
Displacement
Bore x Stroke
C H R Y S L E R 2 0 0 C O N V E R T I B L E
Four-door sedan
Sterling Heights Assembly, Mich.
Mid-size sedan
January 2011
Standard on 200 Touring
Four-cylinder inline, tuned intake manifold with electronic active charge
motion control valves with dual counter-rotating balance shafts
144 cu. in. (2360 cu. cm)
3.46 x 3.82 (88 x 97)
Chain-driven DOHC, 16 valves, electronically controlled dual variable-
valve timing (VVT), direct-acting shimless mechanical bucket tappets
Sequential, multi-port, electronic, returnless
High-pressure die-cast aluminum block with dry iron liners, cast-aluminum
cylinder heads, cast-aluminum ladder frame, forged-steel crankshaft
10.5:1
173 bhp (129 kW) @ 6,000 rpm (71 bhp/liter)
166 lb.-ft. (225 N•m) @ 4,400 rpm
6,500 rpm (electronically limited)
Unleaded regular, 87 octane (R+M)/2
4.5 qt. (4.23L) SAE 5W-20
7.7 qt. (7.3L)
Single catalytic converter dual heated oxygen sensors and engine
(a)
features
18 mpg city/29 mpg highway
Available on 200 Touring. Standard on Limited and S
60-degree bank angle, liquid-cooled, three-plenum intake manifold with
electronically controlled manifold tuning valve and short-runner valves
3605 cu. cm
3.78 x 3.28 (96 x 83 mm)
/
S P E C I F I C A T I O N S
1

Advertisement

loading

Summary of Contents for Chrysler 200 Convertible 2011

  • Page 1: Specifications

    NOTE: Information shown is correct at time of publication and is subject to change. 2011 Chrysler 200 Convertible SPECIFICATIONS The information shown is preliminary and based on data available at the time of publication. All dimensions are in inches (millimeters) unless otherwise noted. All dimensions are measured at curb weight with standard wheels and tires unless otherwise noted.
  • Page 2: Drive Train

    Valve System DOHC, 24 valves, hydraulic, roller finger followers Fuel Injection Sequential, multi-port, electronic Construction High-pressure die-cast A380 aluminum block with iron liners and semi- permanent mold A319 aluminum heads Compression Ratio 10.2:1 Power (SAE net, estimated) 283 bhp (211 kW) @ 6,400 rpm Torque (SAE net, estimated) 260 lb.-ft.
  • Page 3 Overall Width 72.5 (1842.6) Overall Height w/Cloth Convertible Top 57.9 (1470) Overall Height w/Retractable Hard Top 57.8 (1469) Aero Fuel Tank Capacity, gal. (L) 16.9 (64.0) Towing Capabilities, NAFTA Markets lbs. (kg) 2.4L Auto. Trans 1,000 (450) 3.6L Auto. Trans 1,000 (450) (e) Maximum frontal area of trailer or boat: 22 square feet 3.6L engine and 11 square feet 2.4L engine.
  • Page 4 BODY/CHASSIS Layout Transverse front engine with front-wheel drive Construction Steel unibody SUSPENSION Front Independent MacPherson strut, coil spring over gas-charged shock absorbers, stabilizer bar Rear Multi-link independent with coil springs, link-type stabilizer bar, gas- charged shock absorbers and isolated rear suspension cradle STEERING Type Power rack and pinion...
  • Page 5 WHEELS Availability Standard on 200 Touring model Type and Material Machined and painted cast-aluminum, Sparkle Silver Size 17 in. x 6.5 in. Availability Standard on 200 Limited model Type and Material Polished with Painted Pockets, cast-aluminum, Satin Carbon Size 18 in. x 7.0 in. Availability Standard on 200 S model Type and Material...