Uniden DECT 3035 Owner's Manual page 20

Caller ID problems Possible solutions
No handsets
display Caller ID
information.
Caller ID displays
briefly and then
clears.
Multi-handset problems
I can't transfer calls.
Two handsets can't talk to
a caller.
A handset says Unavailable.
I can't register a new
handset.
Answering system
problems
The answering system
does not work.
The system won't record
messages.
A handset can't access
the answering system.
My outgoing message is
gone.
I can't hear the base
speaker.
Messages are
incomplete.
The system keeps
recording when I answer
on an extension.
20
Let calls ring twice before answering.
x
Make sure your Caller ID service is active.
x
You may have to change the line mode. Visit the
x
customer support page on the website for more
information.
Possible solutions
Reset the handset (see p. 21).
x
See if any handset is in Privacy Mode.
x
Move the handset closer to the base.
x
See if any handset is in Privacy Mode.
x
Reset the handset (see p. 21).
x
See if you have 12 registered handsets.
x
Possible solutions
Make sure the answering system is on.
x
Make sure the base is plugged in.
x
See if Record Time
x
Delete messages (memory may be full).
x
See if another handset is using the system.
x
Make sure the phone is in standby.
x
If there was a power failure, re-record your
x
personal outgoing message.
Make sure call screening is turned on.
x
Change the base speaker volume.
x
Increase the
x
Delete messages (memory may be full).
x
You may have to change the line mode.
x
Contact Customer Service for instructions.
is set to Announce
Record Time.
Only.