Air Compressor Pump Intake And Exhaust Valves; Motor - Craftsman 919.166700 Operator's Manual

3. If dirty, rinse air filter with warm water and
squeeze dry.
4. Replace air filter and air filter cover.
NOTE: If the air filter is extremely dirty it will need to
be replaced. Refer to the "Repair Parts" for the cor-
rect part number.
Air Compressor Pump Intake and
Exhaust Valves
Once a year have a Trained Service Technician
check the air compressor pump intake and exhaust
D23012

Motor

The motor has an automatic reset thermal overload
protector. If the motor overheats for any reason, the
overload protector will shut off the motor. The
motor must be allowed to cool down before restart-
ing. The compressor will automatically restart after
the motor cools.
If the overload protector shuts the motor off fre-
quently, check for a possible voltage problem. Low
voltage can also be suspected when:
1. The motor does not get up to full power or
speed.
2. Fuses blow out when starting the motor; lights
dim and remain dim when motor is started and
14 - ENG