Installing Roll Paper - Epson TM-L90 User Manual

CAUTION:
Never install the printer in locations that
receive direct sunlight. The diffuse reflection
from the roll paper may cause the label peeler
detector to malfunction. When a malfunction
occurs, the PAPER OUT LED starts flashing. Press
the FEED button to resume using the printer.
Note:
To hang the printer on the wall, see the Wall
Hanging Bracket Set Installation Manual provided
with the WH-10 for instructions.

Installing Roll Paper

Note:
Be sure to use roll paper that meets the specifications.
1. Make sure that the power is on.
2. Pull the peeler open lever forward and open the peeler cover. (See the
illustration on the left below.)
3. Pull the roll paper cover open lever forward, and open the roll paper cover.
(See the illustration on the right below.)
4. Insert the roll paper, as shown below.
TM-L90 with Peeler User's Manual 5
English