Related Manuals for Shure CP 7890
Summary of Contents for Shure CP 7890
-
Page 1: User Guide
Conferencing and Discussion Systems CP 7890 Camera Control Package USER GUIDE © 2014 Shure Incorporated 27A26855 (Rev. 1) -
Page 2: Table Of Contents
Table of Contents Table of Contents Using the App Camera Control Application Description Overview Layouts Description Saving a Camera Preset Features Set the Overview Scene Included Accessories Multiple Camera Operation Installation Networked Video Switcher System Overview Analog Video Switchers Downloading the App Basic System Setup Addendum Adding Devices to the Camera Control Network... -
Page 3: Overview
Once the camera views are programmed recording. and saved from the app, the AMX unit operates the camera system without requiring the tablet. The CP 7890 system supports any cameras that operate the Visca protocol. Features • Easily integrates a camera system with the DCS 6000 or •... -
Page 4: Installation
DCS-LAN conference equipment network Analog video output *Not included with the CP 7980 Shure Camera Control Package Downloading the App Download the Shure CP 7890 Camera App for your tablet: Device Where to Download Minimum Requirements Apple iPad App store iOS 7.0... -
Page 5: Basic System Setup
> > LAN Setup IP Address Setup IP Address 6. Download and install the Shure Camera Control app to the tablet. to conference equipment 7. Open the WiFi settings on the tablet and connect to the router's network name: 2. Connect the... -
Page 6: Viewing The Video Stream
Delete Important: a video encoder is required for viewing the video ZOOM SPEED (1 - 20) CAMERA VIEWS picture on the camera control application. To connect a video encoder to the Shure Camera Control system: NETL INX NX-1200 SERIAL MASTER... -
Page 7: Using The App
Using the App Camera Control Application Description ① ② ④ Open Mics Displays the number of microphones that are turned on in the 100% Verizon 9:43 PM connected DCS 6000 or DDS 5900 system. Camera Controller Layouts Setup ③ NETWORK ⑤... -
Page 8: Layouts
When using the DCS 6000 or DDS 5900 systems, seats 5. Press the save button. The selected camera button shows 0 - 400 can be assigned a camera preset with the CP 7890 displays with a darker outline to show that the preset has system. -
Page 9: Multiple Camera Operation
Multiple Camera Operation When using more than one camera, connect a video switcher 100% Verizon 9:43 PM ② Camera Controller Layouts Setup to manage multiple video feeds. There are two types of NETWORK switchers: Connected OPEN MICS • Networked switchers: connect to the wireless router with a SEAT NUMBER ①... -
Page 10: Addendum
Addendum Operation with Additional Equipment Additional components may operate with the camera control system. Go to menu to select from the compatible Settings component categories: • Camera protocol • Microphone system • Camera switcher Changing the Wireless Channel Change the wireless router channel if there is a problem with the tablet connection. 1. -
Page 11: Visca Cables Configuration With Sony Cameras
VISCA Control Cables configuration with Sony cameras Reference the following drawing for the VISCA cable configuration for both RS-422 and RS-232 for Sony cameras. RS-422 Connection Note: The pin layout shown for RS-422 is for Sony EVI-D70P cameras. For Sony BRC-300/300P cameras, Pin 1 and Pin 9 are swapped. -
Page 12: Troubleshooting
Troubleshooting The menus in the CP 7890 software are not • Check the WiFi settings on the tablet. The Shure CP 7890-xxxA should be active connected • Check that the Visca cable from the camera is connected to the RS-...