Startup And Termination; On First-Time Startup; Regular Startup; Turning Off The Display - Pioneer SPH-DA120 Operation Manual

Basic operation
Unplugging a USB storage device
% Pull out the USB storage device after
checking that no data is being accessed.

Startup and termination

1 Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
2 Turn off the vehicle engine to termi-
nate the system.
This product is also turned off.

On first-time startup

When you use this product for the first time,
select the language that you want to use.
1 Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
The "Select Program Language" screen ap-
pears.
2 Touch the language that you want to
use on screen.
3 Touch the following key.
Displays the "Smartphone Setup"
screen.
4 Touch the item you want to set.
= For details, refer to Information on the con-
nections and functions for each device on
page 30.
5 Touch the following key.
Displays the Top menu screen.
# If you touch , the display returns to the pre-
vious screen.

Regular startup

% Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
p The screen shown will differ depending on
the previous conditions.
p If the anti-theft function is activated, you
must enter your password.

Turning off the display

You can turn off the display at night or when
the screen is too bright.
When the application screen is
available
% Touch and hold the MODE button.
The display turns off.
When the application screen is
not available
% Touch the MODE button.
The display turns off.
p If you touch the screen when the display is
off, it reverts to the original screen.
Chapter
02
9
En