Enlarging Or Reducing The Copied Image - Brother MFC-J265W User Manual

Chapter 7
Enlarging or reducing the
copied image
You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust the size automatically to
the paper size you set.
a
Press (COPY).
b
Load your document.
c
Enter the number of copies you want.
d
Press a or b to choose
Enlarge/Reduce.
Press OK.
e
Press a or b to choose 100%, Enlarge,
Reduce, Fit to Page or
Custom(25-400%).
f
Do one of the following:
 If you chose Enlarge or Reduce,
press OK and press a or b to choose
the enlargement or reduction ratio
you want.
Press OK.
 If you chose Custom(25-400%),
press OK and then enter an
enlargement or reduction ratio from
25% to 400%.
Press OK.
 If you chose 100% or Fit to Page,
press OK. Go to step g.
20
198% 10x15cmiA4
7
186% 10x15cmiLTR
142% A5iA4
100%
97% LTRiA4
93% A4iLTR
(MFC-J220 and MFC-J265W only)
83%
(MFC-J410 only)
83% LGLiA4
69% A4iA5
47% A4i10x15cm
Fit to Page
Custom(25-400%)
g
If you do not want to change additional
settings, press Mono Start or
Color Start.
Note
• Page Layout is not available with
Enlarge/Reduce.
• Page Layout and Sort (MFC-J410
only) are not available with
Fit to Page.
• Fit to Page does not work correctly
when the document on the scanner glass
is skewed more than 3 degrees. Using the
document guidelines on the left and top,
place your document in the upper left
hand corner, with the document face down
on the scanner glass.
• Fit to Page is not available when
using the ADF.