Table of Contents
Advertisement
(7) BRAKE FLUID LEVEL INSPECTION /REFILLING
Remove the 2 screws from the brake fluid tank and take
off the cover.
Add recommended brake fluid DOT-4 into the tank until
the fluid level reaches the upper limit and then put on the
cover and tighten the screws.
Recommended Brake Fluid: DOT-4
Do not mix brake fluid of different brands. It may
cause brake failure and is very dangerous. When
refilling brake fluid, use towels to cover and protect
the painted and coated surfaces.
(Replace at every 10000km or once a year.)
(8) RUBBER COVER INSPECTION FOR WIRE AND
CABLE
The cable cores are protected by the rubber cover outside
the connector. Check the rubber cover frequently for
prop
er installation.
When washing the motorcycle, do not flush the rubber
co
ver directly or brush it. Use a wet rag to wipe off dirt
and
dust.
Rubber Cover
Check Points
46
Hide quick links:
Advertisement
Table of Contents
