Horn/Lights Inspection - KYMCO Quannon 125 Driver Manual

(8) HORN/LIGHTS INSPECTION

Turn the ignition switch "ON" and press the horn button to
check if it sounds.
Headlight/Taillight Inspection:
Start the engine and turn on the headlight switch to check
if the headlight and taillight are good and check the light
shells for dirt and damage.
Stoplight Inspection:
Apply the front brake lever and rear brake pedal
respectively to check if the stoplight is good. And also
check the stoplight shell for dirt and damage.
Turn Signal Light Inspection:
Operate the turn signal switch to make sure whether the
right/left front and rear turn signal lights can wink and
buzz.Also check the light shells for dirt and damage.
Headlight Taillight/ Stoplight
Horn button
CAUTION:
Replace any dirty or damaged lights with new ones to
avoid danger during riding.
Turn signal light
25