The Dish Pointing Menu Screen - RCA Digital Satellite Receiver User Manual

The Menu System

The Dish Pointing Menu Screen

Follow these steps to obtain your dish pointing coordinates:
1. Turn on your television and digital satellite receiver.
2. Tune your television to the digital satellite receiver's output channel.
3. Press MENU on the remote control to bring up the Main menu.
4. Use the arrows to highlight Dish Pointing, then press OK to access
the dish pointing screen.
NOTE: The menu screen that you see may be slightly different from
the one pictured here.
5. Use the arrows on the remote control or the front panel to
highlight Zip Code, then press OK.
6. Enter the Zip Code for the dish installation location.
7. Record the elevation and azimuth numbers below.
Elevation _____________
Elevation is the up/down
angle that the satellite
dish antenna is pointed.
Azimuth ___________
Azimuth is the side- to-
side direction that the
satellite dish antenna is
pointed.
You only need to use one of the available
methods to find your dish pointing
coordinates. If you know the zip code for
the dish installation location, use that.
59