Safety Information - RCA Digital Satellite Receiver User Manual

Safety Information

WARNING
To reduce risk of fire or
shock hazard, do not
expose this receiver to
rain or moisture.
Cautions
Note to Cable TV Installer:
Note to Satellite Dish Installer:
IMPORTANT NOTICE:
Care and Cleaning:
Product Registration
Please fill out the product registration card and return it immediately. Returning the card allows us to contact you if needed.
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model
numbers in case you need them. The numbers are located on the back of the receiver.
Model No. ____________________________________________________
Serial No. ____________________________________________________
Purchase Date:
Dealer/Address/Phone: ___________________________________________________________________________________
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates
important instructions
accompanying the product.
Do not stack electronic components or other objects on top of the Digital
Satellite Receiver. The slots on top of the receiver must be left uncovered to
allow proper airflow to the unit. Blocking the airflow to the unit could impair
performance or damage your receiver and other components.
Do not stack the digital satellite receiver on top of a "hot component" such as an
audio power amplifier.
FCC Regulations state that unauthorized changes or modifications to this
equipment may void the user's authority to operate it.
Your system may be equipped with an RF remote control. The RF remote control
complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: 1) The RF remote may not cause harmful interference and; 2) The
RF remote must accept any interference recieved, including interference that
may cause undesired operation.
This reminder is provided to call your attention to Article 820-40 of the National
Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which
provides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building as
close to the point of cable entry as practical.
This reminder is provided to call your attention to Article 810, and in particular
Article 810-15, of the National Electrical Code (which covers proper installation
and grounding of television receiving equipment) as well as to Article 820-40,
which specifies that the satellite dish antenna cable ground shall be connected
to the grounding system of the building as close to the point of cable entry as
practical.
This device incorporates an anticopy process technology that is protected by
U.S. patents and other intellectual property rights measures. The anticopy
process is licensed for non-commercial, home use only. Reverse engineering or
disassembly is prohibited.
Use a soft cloth or the dusting attachment of your vacuum cleaner to dust your
digital satellite receiver. Remove dust from both top and bottom ventilation holes.
Plastic surfaces are easily scratched and can be marred by alcohol and various
solvents. Avoid excessive use of oil-based furniture polishes since the materials
used in the cabinet will accumulate more dust. A non-abrasive, anti-static
cleaner/polisher is recommended.
________________________________________________
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates "dangerous
voltage" inside the product that
presents a risk of electric shock or
personal injury.