Epson Stylus Photo 1290 User Manual page 19

3. Insert the printer software CD shipped with your printer in
the CD-ROM drive. The Installer dialog box appears. If it does
not, double-click the My Computer icon, click the CD-ROM
icon, then click Open on the File menu. Then, double-click
EPsetup.exe. (For floppy disk users, insert the disk in a disk
drive and double-click the My Computer icon, then the
floppy disk drive icon, and then Setup.exe.)
4. Select Install Printer Driver/Utility,
and click
dialog box that appears to start
the printer software installation.
If Problem Solver is available in
your location, it is automatically
installed on your hard drive.
Note:
❏ It is possible to install the
Reference Guide on your hard drive from the Installer dialog
box, as shown to the right. To install the guide, click Online
Guide and then
and follow the on-screen instructions. When the installation is
complete, an ESP 1290 890 Guide icon appears in the
EPSON folder. Double-click the icon to open the guide.
❏ The Problem Solver provides tips and instructions to help you
solve most problems that you may encounter when printing.
The Problem Solver can be accessed through the EPSON folder,
Status Monitor 3, or the printer software. For details, see the
"Troubleshooting" section of your Daily Use guide.
5. Follow the on-screen instructions to turn on your printer.
For Windows Me and 98 users, the printer port configuration
starts automatically.
For printers connected via the USB cable, the USB device
driver installation starts automatically at this point. When a
message appears asking you to restart your computer, do so.
. Then, click OK in the
. Then, click Install Reference Guide
13