Epson Stylus Photo 1290 User Manual page 116

2. For Windows 98 users, click the Details tab and make sure
that EPUSBx: (EPSON Stylus Photo 1290 or 890) is displayed
in the Print to the following port list box. For Windows 2000
users, click the Ports tab and make sure that USBxxx, EPSON
Stylus Photo 1290 or 890 is displayed in the Print to the
following port(s) list box.
Note:
If the correct port is not displayed, refer to the next section, "Make
sure that EPSON USB Printer Devices appears on the Device
Manager menu (for Windows Me and 98)".
The Device Manager menu (for Windows Me and 98 only)
If you canceled the plug-and-play driver installation before the
procedure was complete, either the USB printer device driver or
the printer software may be incorrectly installed.
Follow the steps below to check the installation and reinstall the
drivers.
1. Turn the printer on. Plug the USB cable into the printer and
the computer.
110