Troubleshooting; Battery Pack And Power - Sony Alpha NEX-6 Instruction Manual

Troubleshooting

If you experience trouble with the camera, try the following solutions.
Check the items on pages 83 to 87. Also refer to
1
"α Handbook" (PDF).
Remove the battery pack, wait for about one minute, re-
2
insert the battery pack, and then turn on the power.
Reset the settings (page 61).
3
Consult your Sony dealer or local authorized Sony service
4
facility.

Battery pack and power

The battery pack cannot be installed.
• When you insert the battery pack, use the tip of the battery pack to push the
lock lever (page 16).
• You can use an NP-FW50 battery pack only. Make sure that the battery is
NP-FW50.
The remaining battery level indicator shows incorrect level or
power runs out quickly despite the indicator showing sufficient
battery level.
• This phenomenon occurs when you use the camera in an extremely hot or
cold location.
• The battery pack is discharged. Install a charged battery pack (page 16).
• The battery pack is dead. Replace the battery pack with a new one.
Cannot turn the camera on.
• Install the battery pack correctly (page 16).
• The battery pack is discharged. Install a charged battery pack (page 16).
• The battery pack is dead. Replace the battery pack with a new one.
GB
83