Left Crankcase Cover - KYMCO GRAND DINK 250 Manual

8
. DRIVE AND DRIVEN PULLEYS/
KICK STARTER

LEFT CRANKCASE COVER

REMOVAL
Loosen the drive belt air tube band screw.
Remove the four bolts on the left crankcase
surface cover.
Remove the left crankcase cover bolts and
left crankcase covers.
Remove the seal rubber and dowel pins.
INSTALLATION
Install the dowel pins and the seal rubber.
Install the left crankcase cover.
Install the cable clamp to the specified
location. Install and tighten the left
crankcase cover bolts.
8-3
GRAND DINK 250
Air Tube Band
Bolts
Left Crankcase Cover
Dowel Pins
Seal Rubber
Left Crankcase Cover
Bolts
Cover