Pnp/Pci/Pci-E Configuration - Intel i915PL User Manual

BIOS

4-6 PNP/PCI/PCI-E Configuration

This page lets the user to modify the PCI/PCI-E IRQ signals when various PCI/PCI-E
cards are inserted.
WARNING: Conflicting IRQ's may cause system unable to locate certain devices.
Figure 7: PNP/PCI/PCI-E Configuration Setup
Init Display First
This item is used to select whether to initialize the PCI-E or PCI first when the system
boots.
Options: PCI Slot, PCIEx.
Resources Controlled By
Determines what controls system PNP/PCI/PCI-E resources. The default is Auto (ESCD).
Manual: PNP Card's resources are controlled manually. The "IRQ Resources" field
becomes available and you can set which IRQ-X and DMA-X are
assigned to PCI and onboard devices.
Auto: BIOS assigns the interrupt resource automatically.
PCI/VGA Palette Snoop
This item is designed to overcome problems that may be caused by some nonstandard
VGA cards.
Options: Enabled, Disabled.
Page 4-14