Power-On/Off (Remote) - Intel i915PL User Manual

Installation

3-6 Power-On/Off (Remote)

This board has a 24-pin ATX and a 4-pin ATX12V power supply connector to support
power supplies with Remote On/Off feature. The 4-pin ATX12V connector must be
plugged in for the system to operate safely. The chassis power button should be
connected to the mainboard front panel PW_ON header.
You can turn off the system in two ways: by pressing the front panel power On/Off
button or using the "Soft Off" function that can be controlled by an operating
system such as Windows
Note: The board requires a minimum of 300 Watt power supply to operate. Your system configura-
tion (amount of memory, add-in cards, peripherals, etc.) may exceed this minimum power
requirement. To ensure that adequate power, use a 350 Watt (or higher) power supply.
PW-ON
Case (chassis) Power
ON/OFF button (PW-ON)
Figure 8: Simple ATX power ON/OFF controller
Page 3-12
XP/ME/2000/98.
®
12V 4-pin
24-pin