Preparing The Lancing Device 2 - Spirit CareSens N Owner's Booklet

• Caution :
To avoid infection when drawing a sample,
use a lancet only onetime, and:
• Do not use a lancet that has been used by
others.
• Always use a new sterile lancet.
• Keep the lancing device clean.
• Note :
Repeated puncturing at the same sample site
may cause pain or skin calluses. Choose a
different site each time you test.
Preparing the Lancing Device
Step 1
Wash hands and fingertip
sample site with soap and
warm water. Rinse and dry
thoroughly.
Step 2
Unscrew lancing device tip
thoroughly.
2
Step 3
Firmly insert new lancet into
lancet holder. Hold lancet
firmly. Gently twist to pull off
protective disk. Save disk
to recap lancet after use.
Replace lancing device tip.
Step 4
Select a desired depth of
one-to-five (1-5) on lancing
device's adjustable tip.
Rotate ring to align desired
number with arrow. A
beginning setting of three
() is recommended.
Step 5
To cock the lancing device,
hold the tip in one hand.
Pull the sliding barrel on
with the other hand. The
lancing device is cocked
when you feel a click.