2. Attach the channel bracket to a dry, stable surface using the hardware listed on page
appropriate mounting surface.
Mounting into Wood Stud
Channel Bracket
Mounting into Hollow Surface
Channel Bracket
3. Align the mounting holes on the wall bracket with the spring nuts installed in the channel bracket.
Secure the wall bracket in place using the cap screws listed on page 16-10.
4. See
Securing the Base to the Wall Bracket
Base to the wall bracket.
Toggle Nut, Qty. 4
Washer, Qty. 4
Minimum
16 in. (40.64 cm)
Washer, Qty. 4
Toggle Bolt, Qty. 4
Minimum
16 in. (40.64 cm)
(page 16-8) for detailed instructions on securing the Net
16-10
for the
Lag Bolt, Qty. 4
16 - 11