Elements Of The Active Route; Traffic Events - Alpine INE-W940E Owner's Manual

2.2.3.7 Elements of the active route

Your software shows the route in the following way:
Symbol
Current GPS position and
Start point
Waypoint (intermediate
destination)
Destination (end point)
Route colour
Streets and roads that are
excluded from the navigation
Streets and roads that are
affected by traffic events

2.2.3.8 Traffic events

Road segments affected by traffic events are displayed with an alternate colour on the map,
and small symbols above the road show the nature of the event:
Tap
Name
Your current position displayed on the map. If
roads are near, it is aligned to the nearest road.
Normally if GPS position is available, the route
starts from the current position. If there is no valid
GPS position, your software uses the last known
position as the start point.
An intermediate destination of the route before
reaching the final destination.
The final destination of the route.
The route always stands out with its colour on the
map, both in daytime and in night colour mode.
You can choose whether you want to use or
avoid certain road types (page 74). However,
when your software cannot avoid such roads, the
route will include them and it will show them in a
colour that is different from the route colour.
Road segments may be affected by traffic events
received. These streets and roads are displayed
in an alternate colour, and small symbols
displayed along the route show the type of the
traffic event.
to open the list of traffic event categories:
Description
17