Service Schedule - Generac Power Systems 8 - 20kW Air-cooled Automatic Standby Generators Owner's Manual

Maintenance

4.13 SERVICE SCHEDULE

SYSTEM/COMPONENT
X = Action
R = Replace as Necessary
* = Notify Dealer if Repair is
Needed.
FUEL
Fuel lines and connections*
LUBRICATION
Oil level
Oil
Oil filter
COOLING
Enclosure louvers
BATTERY
Remove corrosion, ensure
dryness
Clean and tighten battery
terminals
Check charge state
Electrolyte level
ENGINE AND MOUNTING
Air cleaner
Spark plug(s)
GENERAL CONDITION
Vibration, Noise, Leakage, Temperature*
COMPLETE TUNE-UP*
* Contact the nearest dealer for assistance if necessary.
** Change oil and filter after first eight (8) hours of operation and then every 200 hours thereafter, or 2 years, whichever occurs first. Change
sooner when operating under a heavy load or in a dusty or dirty environment or in high ambient temperatures.
*** Inspect and clean or change more frequently when operating in a dusty or dirty environment.
28
ATTENTION: It is recommended that all service work
be performed by the nearest Dealer.
Inspect
X
X
X
X
X
X
X
X
X
X
TO BE COMPLETED BY A DEALER
PROCEDURE
Change Clean
X
X
R
R
R
R
FREQUENCY
W = Weekly
M = Monthly
Y = Yearly
M or 24 hours of
continuous operation.
2Y or 200 hours
of operation.**
2Y or 200 hours
of operation.**
X
X
X
EVERY 6 M
EVERY 6 M
2Y or 500 hours***
2Y or 500 hours
2Y or 200 hours
M
W
M
M
M