Project Information Section - Akai MPC User Manual

Hardware:
1. Press F2 (TrkGroup) to activate Track Group.
2. Hit a pad to select it. Use the Pad Bank buttons to switch between the 16 banks, if necessary.
3. Use the Data Dial or -/+ buttons to select the desired Mute Group number.
•
When a pad in a Mute Group is selected, the other pads in that same Mute Group will blink yellow.
•
Press F6 (Solo) to solo the selected pad.
Time Correct lets you quantize Track Mutes. This is useful when you want your mutes to line up with a
specific time division. Click the Time Correct drop-down menu and select a value from 1/16th (sixteenth
notes) to 2 bar (2 bars). For example, with Time Correct set to 1 bar, your mutes will always align with
the beginning of the measure immediately after you press the pad.
Hardware: Press F4 (Time Div) and use the Data Dial or -/+ buttons to edit the Time Correct value.
Press F5 (T.C.) to activate or deactivate Time Correct. Press F6 (Solo) to solo the selected pad.

Project Information Section

This section is identical to the Project Information Section in Main Mode. For more information, please
see the Project Information Section part of the Main Mode chapter.
165