Levels - Akai MPC User Manual

Levels

In the software, click the channel fader and drag it up or down to set the level. To view more mixer
channels, use the scroll bar under the channel faders at the bottom of the window.
Hardware: To set the level for a channel, press the F2 button (Level) and use the corresponding Q-Link
Knob for editing. You can use the Pad Bank buttons to select different sets of 16 channels.
The Level tab's Track view in the Track Mixer Mode in the display of the MPC hardware
The Level tab's Plugin view in the Track Mixer Mode in the display of the MPC hardware
Levels for Plugin Programs
Channel faders for Tracks are on the left and channel faders for
Plugin Programs are on the right of those. A drop-down menu above
each channel fader's Pan knob displays where its audio is routed. For
the Tracks, this menu displays the name of the Plugin Program
through which you are routing them. For the Plugin Programs, this
menu displays where all of the Plugin Program's audio (from the
Tracks) is routed. Click the downward arrow ( ) to select another
routing destination (e.g., Out 1,2, Submix 1, etc.).
Control the volume of a Track's note events routed to the Plugin
Program by adjusting that Track's volume slider. Use the
corresponding Plugin Program volume slider to control the volume level routed to its output.
Important: By default, some plugins do not support MIDI volume. In this case, adjust this at the plugin
Track.
118