Connecting To The Power Source; Connecting The Ac Cable - Epson TM-T20 Technical Reference Manual

Connecting to the Power Source

• Never insert the AC cable plug into a socket that does not meet the rated voltage
WARNING
• Should a fault ever occur, immediately turn off the power to the printer and unplug
Be sure to use the included AC cable.

Connecting the AC cable

1
Make sure the printer is turned off.
2
Connect the AC cable to the AC inlet.
3
Insert the AC plug into a wall socket.
Do not turn on the printer before installing the printer driver.
38
requirements of the printer.
Doing so may result in damage to the printer.
the AC cable from the wall socket.
AC cable
AC inlet