Installing The Printer Vertically; Vertical Installation - Epson TM-T20 Technical Reference Manual

Installing the Printer Vertically

When installing the printer vertically, be sure to attach the included control panel label for
vertical installation on the roll paper cover, and attach 4 rubber feet in the rectangular indents in
the printer case, as shown in the illustration below.

Vertical installation

You can install the printer so that the roll paper cover is upright to the mounting surface using
the included wall hanging bracket.
1
Attach the control panel label for vertical installation on the roll paper
cover.
2
Install the wall hanging bracket on the printer, and fix it using 2 included
screws.
3
Attach 2 rubber feet in the rectangular indents in the printer case, and
attach 2 rubber feet within the scribed line on the hanging bracket.
4
Place the printer with the wall-hanging-bracket-side down.
Control panel label
for vertical installation
Control panel label for
vertical installation
Rubber feet
3
1
Wall hanging
2
bracket
Rubber feet
Chapter 2 Setup
2
207 mm
{8.15"}
33