D-Link DCS-935L User Manual And Service Information page 23

Section 3 - Configuration
A Dynamic DNS account allows you to access your camera over the Internet when you
have an IP address that changes each time you connect to the Internet. If you have a
Dynamic DNS account, click DDNS Enable and enter the following details:
Server Address: Select your Dynamic DNS Server from the pull down menu.
Host Name:
Enter the host name of the DDNS server.
User Name: Enter your username or e-mail address used to connect to the DDNS.
Password:
Enter your password used to connect to the DDNS server.
Timeout: You can setup how often the camera notifies the DDNS server of its current
global IP address by entering a whole number in hours.
Click Next to continue.
Enter a name for your camera. Click Next to continue.
Select the time zone that the camera is in so that scheduled events occur at the correct time.
Click Next to continue.
D-Link DCS-935L User Manual 23