Samsung SPC-6000 User Manual page 44

appendix
Q & A
Problem
I cannot communicate with the system
controller.
The USB memory is not recognized
properly.
The LCD panel of the system controller is a consumable part.
`
M
To purchase the panel, contact the retailer or service center.
44_ appendix
• Check if the RS-485 communication cable is connected properly.
• If the communication state is unstable due to a noise on the communication line,
connect the G port of the device to the G port of SPC-6000.
• Check if the address of the system controller is specified properly.
• For specifying the address, refer to "Controller Setting" from "Menu Setting".
(► page 35)
• Check if the USB memory works properly.
• Use only one USB memory and try again.
Action