Ignoring An Incoming Call; Accessing Voicemail - Cisco 525 Quick User Manual

The over-display light flashing red or
A single beep from the handset
To switch to the second call – putting the first caller on hold:
Press the flashing red line button.
Press the button again to get back to the first caller

Ignoring an incoming call

To reject an incoming call and send it straight to voicemail, press the "Ignore" soft key.

Accessing voicemail

If you've got voicemail, the red strip light above the LCD display will light up.
To get to your messages, hold down the Voicemail button or dial the Company Voice Portal.
Cisco 525 IP Phone | Quick User guide
© Nomis Connections 2013. All rights reserved.
Page 6 of 7