Display Settings - Panasonic CQ-VD6503W2 Instruction Manual

Troubleshooting
■

Display Settings

The brightness of the
screen is not stable.
43
The picture is dark. The
picture is whitish. Something
is wrong with the picture.
The picture is light in color.
■
Remote control unit
No response to pressing
buttons
Unable to turn on the
power of the main unit
through the remote
control
44
CQ-VD6503W
(continued)
AUTO dimmer is selected.
aSelect one of the dimmer levels from among 1 to 4 to make the dimmer
adjustment become free from light intensity.
The screen is not adjusted properly.
aMake every adjustment of the screen.
The battery is inserted in the wrong direction. A wrong battery is inserted.
aInsert a correct battery in the correct direction.
The battery is weak.
aReplace the battery with new one.
The aiming direction of the remote control unit is wrong.
aAim the remote control unit at the sensor of the unit and press buttons.
The sensor is exposed to direct sunlight. (The remote control unit may not be
operable when the sensor is exposed to direct sunlight. In such a case, the sys-
tem is not faulty.)
aBlock off sunlight to the sensor.
REAR is selected for the remote control setting.
aSelect
FRONT for the remote control setting.
OFF is selected for the ACC selection.
aSelect
ON for the ACC selection.
aPress [SRC] (PWR) of the main unit to turn on the power.