Toshiba Satellite L20 Series Maintenance Manual page 172

Replacement Procedures
Installing the keyboard
The following describes the procedure for installing the keyboard (See Figure 4-9 to 4-110).
1. Turn the keyboard upside down and place it on the palm rest as its face down.
Connect the keyboard flexible cable to the connector CN3200 on the system board.
2. Install the keyboard support plate and secure it with the following screws.
•
3. Turn the keyboard face up and put it on the computer. Make sure that there is no
space between the keyboard and the computer.
4. Secure the keyboard with the following screws.
• M2.5×2.8B
5. Slide and set the speaker cover assembly and secure it with the following screw.
• M2.5×4.0B
6. Install the keyboard brace by pressing it from the topside.
168
M2.5×8.0B FLAT BIND screw
FLAT BIND screw
FLAT BIND screw
x2
x2
x1
Satellite L20 Maintenance Manual(960-Q01)