Step
Parts to remove
15
Intake manifold
16
Regulator and Wire CP
WIRING HARNESS
STEP 16
M6 FLANGE
REGULATOR
BOLT
Remarks and procedures
Disconnect wire connector from regulator,
and then remove regulator from #1 cylinder
baffle.
M8 FLANGE NUT
GASKET
TO KEY SWITCH
WIRE CP
– 22 –
Fasteners
M8 flange nut : 4 pcs.
M6 x 12 Flange bolt : 2 pcs.
STEP 15
INTAKE MANIFOLD
M8 FLANGE NUT
GASKET
STEP 16
TO IGNITION COIL
TO IGNITION COIL