Recording A Picture From Tape As A Moving Picture - Sony DCR-TRV38E Service Manual

Recording a picture from tape as a
moving picture
Your camcorder can read moving picture data recorded on a tape and record it as a
moving picture on the "Memory Stick."
Before operation
Insert the recorded tape into your camcorder.
The POWER switch should be set to
Operate by touching the panel.
(1) Press
(2) Press
recording from.
(3) Press START/STOP. Images and sound are recorded up to the remaining
capacity of the "Memory Stick." See page 105 for details of recording time.
1,2
[a] Available recording time on the "Memory Stick"
[b] This indicator appears for five seconds after pressing START/STOP. This indicator is
not recorded.
[c] Folder name to be recorded
To stop recording
Press START/STOP.
Notes
• Sound recorded in 48 kHz is converted to one in 32 kHz when recording images from
the tape to the "Memory Stick."
• Sound recorded in stereo is converted to monaural sound when recording from the
tape.
Titles
You cannot record the titles.
If the " AUDIO ERROR" indicator appears
Sound that cannot be recorded by your camcorder has been recorded. Connect the A/V
connecting cable to input images played back on an external device (p. 120).
Recording date/time
The date/time when it is recorded on the "Memory Stick" are recorded. Various
settings are not recorded.
. The picture recorded on the tape is played back.
again to pause playback at the scene where you want to start
.
3
50min
N 0:15:42:43
REC 0:00:03
320
[a]
15sec
BBB
[b]
[c]
101
119