Camera Settings - Mio DigiWalker A502 User Manual

The device's GPS port has been activated and the system is now searching
for GPS positioning data.
Once the system acquires the GPS positioning data, the longitude and
latitude information of your current location will display on the screen. Take
pictures according to the instructions described in the "Taking Pictures"
section.
NOTE: The program stops searching if the GPS positioning data cannot be acquired in
2 minutes. You can tap the

Camera Settings

Tap in the Camera mode to access related settings.
Item
Camera
icon to start another search.
Name
Sets the camera mode. The options are Auto
Mode
(default), Night, Sports, Indoor and Outdoor.
Sets the flash mode. The options are On, Off and
Flash
Auto (default).
Sets the resolution of the picture. The options are
Resolution
1600X1200, 1280X960, 800X600, 640X480 and
400X300. (The software encode mode only
supports 400X300.)
Timer Sets the delay time of the timer. The options are
5s, 10s and Off (default).
Description
7-5